First you need to put on S5620XEJE1. VERY MPORTANT IF YOU WANT UR PHONE TO WORK AT ALL. Not proper firmware+android mod results that phone cant start(boot). this description is traslated from hungarian. P.S.: I am not a free customer service, nor I do take any responsibilty if you screw it up. If your not sure, dont even start!!!
I AM NOT A FREE CUSTOMER SERVICE SO DONT BUG ME WITH THIS, I HAVE A JOB.
BE CAREFUL ITS A HACK, IT MAY LEAD TO MALFUCTION AND/OR LOSS OF GUARANTEE!!!
To check which frimware you have, type: *#1234#, if not S5620XEJE1 then put on, otherwise putting only android skin you CANNOT USE YOU PHONE, IT WONT DO NOTHING!!! so first put firmware, I wont help if somebody skips firmware.
S5620XEJE1 firmware: http://www.multiupload.com/WVPSZ23KF4
multiloader: http://www.megaupload.com/?d=4SU51ENI
android mod: http://url4u.webs.com/apps/forums/top...
samsung usb driver: http://www.mediafire.com/?dmuyy2dlgzv KIES is not needed
As for the upgrade, you need:
- ORIGINAL Samsung S5620 Samsung USB Cable
- Installed the Samsung USB driver on the machine or Samsung Kies program
- MultiLoader flash program
- Firmware
The update process:
- Charge the battery
- Save all your personal stuff from your phone
- Take out the SIM card and memory card
- Check your SIM LOCK (not equal to the network lock), you enter the main screen: * # 7465625 # (need to scroll down the pop-up menu to see)
- If you have written to ON, then the security settings menu to turn off
- Make a reset, home screen, enter: * 2767 * 3855 #
- After reboot, turn off the phone
- Install the machine on the Samsung USB driver (but in principle it is sufficient if the loss of the program already installed on your machine).
- Download and unzip the zipped firmware file
- Start MultiLoader-t
- Check the top-at BRCM2153
- Icon change to the boot
- The point choose bootfiles Boot (boot) folder
- Check to full download
- Then select the next line points to the appropriate files: Amss, Apps, Rsrc1, Rsrc2, FS Factory, CSC, SHP APP, PFS
All these should be selected as appropriate, its clear and self explainitory. Check at picture on bottom. (the CSC is possible that specific folder).
- Make sure there is at the low Rsrc2 choose the version of the Factory of the PFS and FS files that belong in the same region
Should look EXACTLY like on the picture(on the bottom, check link). Any mistake: MALFUNCTION!!!
- Put the phone in download mode: Push at the same time reduce volume+ camera+ power button for few seconds. If successful, then you'll see on the screen "download".
- After the original Samsung USB cable to connect your phone to your computer and let Windows install the drivers.
- Click on the search button on multiloader program, the port will indicate if a port has found your Monte-t.
- For security reasons, once again skim through the settings and make sure that the machine will not turn off during the update.
- Click the Download button in the program, and can begin the upgrade. Right type, just where you stand, about 5 minutes to complete the upgrade. Leave the phone alone!, do not turn off the machine, do not pull off the cable!
- The right lane will be when finished, then the phone will reboot automatically. Kies mode after restarting the computer will join, if you see the connection screen, you can pull the phone from the program and may be contacted.
- Then again, do a reset: * 2767 * 3855 #
- After restart, turn off the device, SIM card and put it back in the memry card, You're done!
Warning! Compliance with all the important points to ensure safety. Everyone is doing it at your own risk, knowing that even the warranty is void if you mess up something. I do not take responsibility for it. If you are not sure, question on an Internet forum like darkforestgroup(google it best monte forum).
then put on android mod:
here is how it must look(on picture)
then put RES directory on phone, BUT not on ur memory card, on phone internal memory, essential(with bluetooth, or with cable)
apps_compressed.bin to apps, a Rsrc2_S5620(Low).rc2-t to RSRC2 (in multiloader of course and android mod, like on picture. dont forget to set control to LSI6410)
and everything set like on picture
hope it works
be precise, and follow everything like a soldier u'll succed :D or just try some description from the net, firmware update is more risky and complicated android mod is 5 minutes
Reference pictures: http://www.kephost.com/images4/2011/1...
http://www.kephost.com/images4/2011/1...
I AM NOT A FREE CUSTOMER SERVICE SO DONT BUG ME WITH THIS, I HAVE A JOB.
BE CAREFUL ITS A HACK, IT MAY LEAD TO MALFUCTION AND/OR LOSS OF GUARANTEE!!!
To check which frimware you have, type: *#1234#, if not S5620XEJE1 then put on, otherwise putting only android skin you CANNOT USE YOU PHONE, IT WONT DO NOTHING!!! so first put firmware, I wont help if somebody skips firmware.
S5620XEJE1 firmware: http://www.multiupload.com/WVPSZ23KF4
multiloader: http://www.megaupload.com/?d=4SU51ENI
android mod: http://url4u.webs.com/apps/forums/top...
samsung usb driver: http://www.mediafire.com/?dmuyy2dlgzv KIES is not needed
As for the upgrade, you need:
- ORIGINAL Samsung S5620 Samsung USB Cable
- Installed the Samsung USB driver on the machine or Samsung Kies program
- MultiLoader flash program
- Firmware
The update process:
- Charge the battery
- Save all your personal stuff from your phone
- Take out the SIM card and memory card
- Check your SIM LOCK (not equal to the network lock), you enter the main screen: * # 7465625 # (need to scroll down the pop-up menu to see)
- If you have written to ON, then the security settings menu to turn off
- Make a reset, home screen, enter: * 2767 * 3855 #
- After reboot, turn off the phone
- Install the machine on the Samsung USB driver (but in principle it is sufficient if the loss of the program already installed on your machine).
- Download and unzip the zipped firmware file
- Start MultiLoader-t
- Check the top-at BRCM2153
- Icon change to the boot
- The point choose bootfiles Boot (boot) folder
- Check to full download
- Then select the next line points to the appropriate files: Amss, Apps, Rsrc1, Rsrc2, FS Factory, CSC, SHP APP, PFS
All these should be selected as appropriate, its clear and self explainitory. Check at picture on bottom. (the CSC is possible that specific folder).
- Make sure there is at the low Rsrc2 choose the version of the Factory of the PFS and FS files that belong in the same region
Should look EXACTLY like on the picture(on the bottom, check link). Any mistake: MALFUNCTION!!!
- Put the phone in download mode: Push at the same time reduce volume+ camera+ power button for few seconds. If successful, then you'll see on the screen "download".
- After the original Samsung USB cable to connect your phone to your computer and let Windows install the drivers.
- Click on the search button on multiloader program, the port will indicate if a port has found your Monte-t.
- For security reasons, once again skim through the settings and make sure that the machine will not turn off during the update.
- Click the Download button in the program, and can begin the upgrade. Right type, just where you stand, about 5 minutes to complete the upgrade. Leave the phone alone!, do not turn off the machine, do not pull off the cable!
- The right lane will be when finished, then the phone will reboot automatically. Kies mode after restarting the computer will join, if you see the connection screen, you can pull the phone from the program and may be contacted.
- Then again, do a reset: * 2767 * 3855 #
- After restart, turn off the device, SIM card and put it back in the memry card, You're done!
Warning! Compliance with all the important points to ensure safety. Everyone is doing it at your own risk, knowing that even the warranty is void if you mess up something. I do not take responsibility for it. If you are not sure, question on an Internet forum like darkforestgroup(google it best monte forum).
then put on android mod:
here is how it must look(on picture)
then put RES directory on phone, BUT not on ur memory card, on phone internal memory, essential(with bluetooth, or with cable)
apps_compressed.bin to apps, a Rsrc2_S5620(Low).rc2-t to RSRC2 (in multiloader of course and android mod, like on picture. dont forget to set control to LSI6410)
and everything set like on picture
hope it works
be precise, and follow everything like a soldier u'll succed :D or just try some description from the net, firmware update is more risky and complicated android mod is 5 minutes
Reference pictures: http://www.kephost.com/images4/2011/1...
http://www.kephost.com/images4/2011/1...
